Mini High Resolution Pinhole Camcorder Spy DV Camera w/ Video + sound recording - DV-50

Sensor Type: CMOS

Video resolution: VGA 300 thousand pixels

Vedio format: AVI 30 frames/sec

Photo resolution: 2 million pixels(1600*1200)

Photo format:Jpeg

Interface: USB 1.1

Operating System: Microsoft Windows 2000,XP,and Vista

Power on and power off
Power on: place the power switch to ON,and press down the ON/OFF button for 2 seconds to start.
Power off: place the power switch to OFF to shut down.
Auto shutdown: After starting,do not conduct any operation, and automatically shut down after 3 minutes.
Note: dial and insert a TF card, and directly power off.

Charge
The VCR can be connected to computer or charger for charging, and after about 3 hours or so, it is full of power;the red light is on long from slow blinking.(Before charging,need to place switch to ON)

Photo
(1)Install the TF card inside to TF card slot;
(2)Place the power switch to ON;
(3)Long press the ON/OFF button to start;
(4)Place the mode switch to the Photo mode ,and at the time enter the camera standby mode and the red light and green light are on long;
(5)Short press the ON/OFF button to take a photo, and the green light blink;automatically save the shot picture.

Video
(1)Install the TF card inside to TF card slot;
(2)Place the power switch to ON;
(3)Long press the ON/OFF button to start;
(4)Place the mode switch to the Video mode ,and at this time enter the recording standby state and the red light and blue light are on long;
(5)Short press the ON/OFF button to start image recording,and the blue light flashes slowly;in the video process,short press the ON/OFF button to stop image recording and save the current video content;return to the state of video standby,and the red light and blue light are on long;

Sound recording
(1)Start and enter into the camera standby mode, and the red light and green light are on long;
(2)Long press ON/OFF key to start sound recording, and the green light flashes slowly;in the state of sound recording,short press the ON/OFF button to stop sound recording and automatically save the audio file,go back to the camera standby mode, and the red light and green light are on long;
Note: in the startup state,the camera stabdby and video standby mode can be directly converted.

Connect the VCR to a computer USB port,and locate a removable disk;

Conect the PC camera
   First,install STK02N 2.0 version of the PC camera driver
   After Drive is installed, press down the Play button to connect the computer USB port and locate the PC camera equipment.(Before connecting,place the power switch      to OFF)